where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1492 views
Job Offers
NDT-Rope access
NDT-Rope access
06:56 May-16-2019
NDT Techs Required Advanced and Conventional(Multi)

Job Location: Abudhabi Offshore
offered by Rope access dubai

Please send your resumes to the email id ndtropeaccess528@gmail.com with the subject containing the trade for which you are applying and also the expected salary and your availability in date.

1. NDT API Inspector
Qualification: Degree or Diploma Mechanical or Degree in Science. NDT Level III from an International recognized certification body (PCN/ASNT) in RT, UT, PT, VT & MT. Certificate of Proficiency in welding inspection from CSWIP 3.1/ AWS CWI (Certificate should be valid during the entire contract period). API 510 and 570 minimum. API 653 will be added advantage.

Experience:
1. Shall have not less than (12) years of experience in NDT field including on-stream
NDT monitoring in upstream offshore production facilities and Plants, experience in Welding inspections in Oil & Gas industry and not less than (08) years in supervisory position.
2. Familiar with MS Office and Microsoft Programs, industry and international codes and standards.
3.All personal NDE Qualifications/certification should be more than five years old (i.e. Second Renewal)


2.Senior NDT & Welding inspector
Qualification: Degree or Diploma Mechanical or Degree in Science – preferable. NDT Level II from an International recognized certification body (PCN/ASNT) in RT, UT, PT, VT & MT. Certificate of Proficiency of welding inspection CSWIP3.2/ AWS Sr. CWI (Certificate should be valid during the entire contract period). Should be a Radiation Protection Officer training & certification in accordance to FANR. The certification should be approved by FANR. Should have knowledge of FANR regulations and ADNOC OFFSHORE requirement in safe handling of radioactive source & safe transportation of radioactive source between offshore installations.

Experience:
1. 8 Years’ Experience in NDT/ Welding inspection including work experience in fabrication and welding jobs at Onshore/Offshore fields, on-stream NDT monitoring in upstream offshore production facilities and Plants in Oil & Gas industry out of which 5 years in supervisory position.
2.Shall have good knowledge and experience in interpreting radiography films against ASME/API fabrication and welding Codes and Standards
3.Familiar with MS Office and Microsoft Programs, industry and international codes and standards.
4.All personal NDE qualifications/ certification should be more than five years old (i.e. Second Renewal)


3. RAT Supervisor
Qualification: Diploma Mechanical or Degree in Science – preferable. Qualified to Industrial Rope Access Trade Association (IRATA) Level III. Additionally, they should be qualified to NDT Level II from an International recognized certification body (PCN/ASNT) in UT, PT, & MT

Experience:1. Shall have at least 07 years Rope Access experience and not less than 5 years in offshore oil installations or similar applications in similar climate of GCC countries. Familiar with MS Office and Microsoft Programs, industry and national code and standards.



4.NDT technician (Multi)
Qualification: Diploma Mechanical or Degree in Science or 12th grade – preferable. NDT Level II from an International recognized certification body (PCN/ASNT) in RT, UT, PT & MT well versed in report preparation. (Certificate should be valid during the entire contract period). RT technician should have additional training and certification in safe handling of radioactive isotopes. The certification should be approved by FANR. Should have knowledge of FANR requirements and ADNOC OFFSHORE requirement in safe handling of radioactive source & safe transportation of radioactive source between offshore installations. Fluent in English.

Experience:
1. Shall have not less than 05 years of experience in the NDT field including onstream NDT monitoring in upstream offshore production facilities. NDT technicians based at offshore shall have multi-discipline NDT
2. Technicians should have experience in inspection for pitting due to corrosion by visual and with pit Gauge.
3. NDT technicians based at offshore shall have multi-discipline NDT and well versed in report preparation.
4. Familiar with MS Office and Microsoft Programs, industry and international codes and standards.
5.All personal NDE qualifications/ certification should be more than five years old (i.e. Second Renewal)



5.Rope Access Technician
Qualification: Diploma Mechanical or Degree in Science or 12thgrade – preferable. The technicians shall be at least qualified to IRATA Level II. Additionally, they should be qualified to NDT Level II from an International recognized certification body (PCN/ASNT) in UT, PT & MT.

Experience:
1. 5 Years of Experience in NDT experience in Offshore fields, on-stream NDT monitoring in upstream offshore production facilities and Plants in Oil & Gas industry.
2. The technician shall have at least three years Rope Access experience and not less than 1200 working hours in offshore oil installations or similar applications in same climate of GCC countries.
All personal NDE qualifications/certification should be more than five years old (i.e. Second Renewal)
3.Technicians should have experience in inspection for pitting due to corrosion by visual and with pit Gauge.
4. Familiar with MS Office and Microsoft Programs, industry and national code and standards



6. Auto Cad draftsman
Qualification: Diploma Mechanical or Degree in Science–Preferable. Should have AutoCAD Training & Certification. The AutoCAD certificate shall be of professional level.
Experience:5 Years minimum experience in pipework isometric Drafting using AutoCAD



7. NDT records and data entry tech

Qualification: Diploma Mechanical or Degree in Science. Should have Computer & Mircosoft Office skills
including Access- certification comparable to Microsoft Project planner

Experience: 3 Years minimum experience in data entry and Microsoft Office. Shall have experience in AutoCAD (Isometric knowledgeable) and familiar with MS (Word,Excel & Power Point) with experience of not less than (two) years in producing piping isometrics



8.Coating inspector
Qualification: Degree or Diploma Mechanical or Degree in Science, in Addition Must possess at least NACE CIP level 2/BGAS Level 1 (or equivalent) certification.

Experience: Minimum five years of experience in painting inspection activities. Offshore experience is required. Experience shall be in the Oil & Gas/Petrochemical Industry



9. Structure Inspector
Qualification:
•Degree Civil Engineering or Mechanical with Structural Engineering or offshore structures Fully familiar with API-2SIM I ISO 19902 Structural Integrity management requirement.
• Conversant with latest standards such as API, SSPC, NACE, AWS D1.1, ASME B 31.3, etc. and knowledge of protective coating, welding, CP, etc. will be preferred.
•Trained & certified in NDT-UT, MPI, CVI, Familiar with advanced ACFM, PAUT etc.
Experience: Trained in Integrity, Safety, Risk assessment, root cause of failure analysis, database management and MAXIMO. Inspector shall be well versed with offshore structures, its component structural elements and the failure mechanisms of the same. 10 years of offshore structures site inspection experience



10.Civil Inspector
Qualification: Degree Civil Engineering or Mechanical with Structural Engineering or offshore structures Fully familiar with API-2SIM I ISO 19902 Structural Integrity management requirement.
Experience: Trained in Integrity, Safety, Risk assessment, root cause of failure analysis, database management and MAXIMO. 10 years of offshore structures site inspection experience


11.Advanced NDT PAUT & TOFD Operator
Qualification: Advanced NDT PAUT-TOFD operators shall be qualified to NDT Level II or Level III requirements as per SNT-TC-1A (SNT-Society for Non-destructive Testing) or PCN Level 2 or 3. AUT personnel shall be adequately trained to use specific AUT Equipment like Olympus Omniscan to be used at site and interpret the AUT data and report as per applicable Codes/Standards

Experience: Shall have not less than (8) years of experience in the NDT field including hands on experience for equipment of offshore production facilities and Plants. Shall be familiar and willing to operate all types of available equipment.



12.Advanced NDT PECT/IRIS/ECT/MFL Operator
Qualification: Advanced NDT operators shall be qualified to NDT Level II or Level III requirements as per SNT-TC-1A (SNT-Society for Non-destructive Testing) or PCN Level 2 or 3. AUT personnel shall be adequately trained to use specific Equipment like Olympus Eddyfi Lyft/Maxwell or equivalent for PECT, Olympus MS 5800 or equivalent Qualified to Conduct IRIS, MFL & EC for tubular inspection at site and interpret the data and report as per applicable Codes/Standards.

Experience: Shall have not less than (5) years of experience in the NDT field and tubular inspection using IRIS/MFL/EC equipment. including hands on experience for equipment of offshore production facilities and Plants. Shall be familiar and willing to operate all types of available equipment.




13. Advanced NDT Specialist
Qualification: Advanced NDT Specialist shall be qualified to NDT Level III requirements as per PCN or ASNT in RT, UT, MT, PT and VT.Degree or diploma Mechanical or degree in science.Certificate of proficiency of welding inspector from CSWIP 3.2/AWS/CWI(certificate should be valid for 5 Yrs)

Experience: Shall have not less than (10) years of experience hands on experience in advance NDT including review and approval of procedures. Validation and establish techniques for applicable procedures. Familiar with all types of process equipment in offshore production facilities and Plants, experience in Welding inspections in Oil & Gas industry would be an added advantage. Should have Computer & Microsoft Office skills, industry and international codes and standards. Personal NDE Qualifications/certification should be more than five years old.




14.Senior record & data analyst
Qualification: Holds a Bachelor Degree, should have Computer & Microsoft Office skills including Access and Visio Strong Knowledge in MAXIMO, ORACLE & DNV Synergi Software, Strong knowledge in IT and archiving requirements
Experience: Minimum 11 years of experience in Oil & Gas Sector with similar scope Familiar with ISO9001 Strong planning skills



15.QA/QC inspector
Qualification: Degree or Diploma Mechanical or Degree in Science is preferable. QA/QC Inspector shall have CSWIP/AWS, BGAS/CIP Level II, ASNT Level II or PCN Level II in RT/UT/MT/PT with respect to pressure vessels, piping, structures, valves. Shall have work experience in inspections in the field of fabrication, Welding, NDT, Painting and hydrostatic test at Onshore and Offshore at facilities. Shall be certified to at least one of the API 510, API 570 or API 653. He shall be well versed and have good working knowledge of AWS/ASME/API/ASTM codes and standards. Certificate should be valid during the entire contract period.

Experience: Shall have not less than 8 years’ experience in the inspections and NDT. Shall have good reporting skills and communication. Should have Computer & Microsoft Office skills, industry and international codes and
standards. All personal NDE/welding/API qualifications/certification should be more than five years old (i.e. Second Renewal)

    
 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window