where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Matec Instrument Companies, Inc.
Ultrasonic test instrumentation and systems for scientific research, quality control inspection and production testing applications.

846 views
Job Offers
Rohan Cooper
Rohan Cooper
05:31 May-21-2019
UT Technician

Job Location: Batam
offered by Dacon Inspection Technologies

Job Location: Batam
offered by Dacon Inspection Technologies

Dacon Inspection Technologies is an independent company offering a wide range of inspection services in industries onshore as well as offshore. The main activities are in the oil and gas, petrochemical and power industry. The company originates in Norway and has its main office in Thailand, from where it covers the whole South East Asian region and more. Provided services range from standard Non Destructive Testing to complete inspection programs and specialized inspection techniques

We have vacancies for: UT Technician (Level II) 3-6 Positions

Firm requirements:
• Eastern/European Nationality (Client requirement)
• Fluency in English (spoken and written), and good verbal communications skills.
• Ability to read technical drawings (piping, P&ID’s, Isometrics, mechanical and I&E).
• Perform thickness and welding inspection using UT
• Good physical health.
• Demonstrated strong safety performance.
• Planning and scheduling.
• Thorough understanding of safe working practices and permitting procedures (JSA, hot work, Simultaneous Operations, vessel entry, lock out procedures, etc.)
• HES requirements and safety of ALL Contractors personnel, including Hazard Analysis, Job Safety Analysis and tool box safety meetings
• Review and approve ALL Contractor’s reports prior to submission

Preferred requirements:
Work experience in Europe/USA/Australia


Please forward CV's and application letters to rohan.c@dacon-inspection.com

    
 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window