where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Technical Discussions
00:38 Jun-12-2019
Subsea phased array probe

Hello, I would like know if some British company in London there is any type of subsea phased array probe available for work until 2500 meter of depth water - with seawater - 250 bar pressure?

I will be next days in London - 14,15,16 and 17th June, and I will appreciate some contact about.

Thank you Regards.

NDT Inspector,
Iran, Joined Mar 2013, 118


NDT Inspector,
Joined Mar 2013
06:00 Jun-12-2019
Re: Subsea phased array probe
In Reply to Fabiana at 00:38 Jun-12-2019 (Opening).

Hi Spec Systems recently produced PAUT subsea probes.also made new iprobes that PAUT pulser is located inside the probes.


Product Spotlight

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window