where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
202 views
Job Offers
Rohan Cooper
Rohan Cooper
07:56 Jun-13-2019
NACE Lvl II - Min 10 yrs exp

Job Location: Thailand/Bangladesh
offered by Dacon Inspection Technologies

Job Location: Bangladesh/Thailand
offered by Dacon Inspection Technologies

Dacon Inspection Technologies is an independent company offering a wide range of inspection services in industries onshore as well as offshore. The main activities are in the oil and gas, petrochemical and power industry. The company originates in Norway and has its main office in Thailand, from where it covers the whole South East Asian region and more. Provided services range from standard Non Destructive Testing to complete inspection programs and specialized inspection techniques

We have vacancies for: NACE Level II (4 positions)

Firm requirements:
• Thai Nationality (Client requirement)
• Fluency in English (spoken and written), and good verbal communications skills.
• Ability to perform all aspects of coating inspections, comprising reports & thorough knowledge of all equipment/standards
• Good physical health.
• Demonstrated strong safety performance.
• Planning and scheduling.
• Thorough understanding of safe working practices and permitting procedures (JSA, hot work, Simultaneous Operations, vessel entry, lock out procedures, etc.)
• HES requirements and safety of ALL Contractors personnel, including Hazard Analysis, Job Safety Analysis and tool box safety meetings
• Review and approve ALL Contractor’s reports prior to submission

Preferred requirements:
More than 10 Years expereince
Work experience in Europe/USA/Australia
Thai National

Please forward CV's and application letters to rohan.c@dacon-inspection.com

 
 

Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window