where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

236 views
Job Offers
Dinesh Puthumana
Megarme Qatar, Qatar, Joined Apr 2019, 6

Dinesh Puthumana

Megarme Qatar,
Qatar,
Joined Apr 2019
6
08:02 Jun-17-2019
Rope access Level II/III E&I technicians

Job Location: Qatar
offered by Megarme Qatar

We have immediate opening for IRATA Level II/III E & I technicians with the below qualifications.
• IRATA L2 (minimum) or L3 certified and valid
• CompEx certified and valid – with minimum 5 years of industrial experience in electrical (Offshore & Onshore) as an E&I technician
• Other trainings required/preferable - TBOSIET (Opito certified), H2S (Opito certified), OGUK medical
• Scope duration – Until end of 2019
• Rotation – 28/28
• Date of joining - Immediate

This opening is for an offshore position.

Interested candidates please send your CV and certificates to 'ropeaccess.cv2019@gmail.com'.

    
 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window