where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
791 views
Technical Discussions
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
01:49 Sep-29-2004
Seamless pipe test.

Hi, Friendes

I want to test the seamless pipe by ultrasonic contact type method.

To cover the maximum area

# I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?

# Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?

Please Help to sort out my purpose. Thanking you.

S.G.




 
 Reply 
 
Ed T.
Ed T.
03:07 Sep-29-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: Hi, Friendes
: I want to test the seamless pipe by ultrasonic contact type method.
: To cover the maximum area
: # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: Please Help to sort out my purpose. Thanking you.
: S.G.
------------ End Original Message ------------

Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
What exactly are you trying to detect?



 
 Reply 
 
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
05:46 Sep-30-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: : Hi, Friendes
: : I want to test the seamless pipe by ultrasonic contact type method.
: : To cover the maximum area
: : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: : Please Help to sort out my purpose. Thanking you.
: : S.G.
: Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: What exactly are you trying to detect?
------------ End Original Message ------------

The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
07:16 Oct-05-2004
Re: Seamless pipe test.
Hello Shashu,
The formula for the determination of beam width Y = arc sin1.22(wavelength/diameter)
Which means that as the diameter of the crystal increases the beam width at a certain beam path length will decrease.
Are you trying to detect the N5 notch radially as well as longitudinally?
The diameter of the pipe will affect the beam spread and beam angle when testing longitudinally.
Will you be shaping the probe shoe to the contour of the pipe?

Regards

Neil Burleigh


----------- Start Original Message -----------
: : : Hi, Friendes
: : : I want to test the seamless pipe by ultrasonic contact type method.
: : : To cover the maximum area
: : : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get themore effective beam width ?
: : : Please Help to sort out my purpose. Thanking you.
: : : S.G.
: : Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: : What exactly are you trying to detect?
: The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.
------------ End Original Message ------------




 
 Reply 
 
akin nowahalla
akin nowahalla
08:25 May-19-2005
Re: use of Seamless pipe
please possible to tell me what is used to produce seamless pipe/steel and what do we use this pipes/steels for.

thanks/me.


 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window