where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.
793 views
Technical Discussions
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
01:49 Sep-29-2004
Seamless pipe test.

Hi, Friendes

I want to test the seamless pipe by ultrasonic contact type method.

To cover the maximum area

# I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?

# Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?

Please Help to sort out my purpose. Thanking you.

S.G.




 
 Reply 
 
Ed T.
Ed T.
03:07 Sep-29-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: Hi, Friendes
: I want to test the seamless pipe by ultrasonic contact type method.
: To cover the maximum area
: # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: Please Help to sort out my purpose. Thanking you.
: S.G.
------------ End Original Message ------------

Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
What exactly are you trying to detect?



 
 Reply 
 
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
05:46 Sep-30-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: : Hi, Friendes
: : I want to test the seamless pipe by ultrasonic contact type method.
: : To cover the maximum area
: : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: : Please Help to sort out my purpose. Thanking you.
: : S.G.
: Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: What exactly are you trying to detect?
------------ End Original Message ------------

The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
07:16 Oct-05-2004
Re: Seamless pipe test.
Hello Shashu,
The formula for the determination of beam width Y = arc sin1.22(wavelength/diameter)
Which means that as the diameter of the crystal increases the beam width at a certain beam path length will decrease.
Are you trying to detect the N5 notch radially as well as longitudinally?
The diameter of the pipe will affect the beam spread and beam angle when testing longitudinally.
Will you be shaping the probe shoe to the contour of the pipe?

Regards

Neil Burleigh


----------- Start Original Message -----------
: : : Hi, Friendes
: : : I want to test the seamless pipe by ultrasonic contact type method.
: : : To cover the maximum area
: : : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get themore effective beam width ?
: : : Please Help to sort out my purpose. Thanking you.
: : : S.G.
: : Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: : What exactly are you trying to detect?
: The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.
------------ End Original Message ------------




 
 Reply 
 
akin nowahalla
akin nowahalla
08:25 May-19-2005
Re: use of Seamless pipe
please possible to tell me what is used to produce seamless pipe/steel and what do we use this pipes/steels for.

thanks/me.


 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Surf-X® Array Probe

Introducing the Surf-X family of flexible Eddy Current Array (ECA) probes. Featuring unique multiple
...
coil sets and proprietary X-PROBE technology, Surf-X array probes can quickly and accurately handle a range of inspection applications, from inspecting corrosion or cracking in pipes, pressure vessels, or tanks, to assessing and sizing cracks in raised welds and friction stir welds.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window