where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1233 views
Technical Discussions
Amry Amin
R & D
Malaysian Inst. for Nuclear Technology Research, Malaysia, Joined Aug 2002, 4

Amry Amin

R & D
Malaysian Inst. for Nuclear Technology Research,
Malaysia,
Joined Aug 2002
4
09:14 Sep-30-2004
Utrasonic probe assessment

Hi everybody,

Besides than ASTM E1065, does anyone knows of standards or procedures of assessing UT probes. Can anyone help.


 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
02:42 Sep-30-2004
Re: Utrasonic probe assessment
Hello,

please take a look at
European Standard EN 12668-2
Nondestructive Testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes

Kind reards



 
 Reply 
 
M.Margolin
M.Margolin
06:23 Apr-20-2006
Testing a temporal resolution
----------- Start Original Message -----------
Which generator to use in EN 12668 # 8.4.7?
What are the waveforms for these measurements?

Regards,

M.Margolin


 
 Reply 
 
Khairul
Khairul
10:34 Jun-28-2011
Re: Utrasonic probe assessment
In Reply to Udo Schlengermann at 02:42 Sep-30-2004 .

Hello all,Any idea where i can sent my UT probe for calibration service as per EN 12668-1 requirement

 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 183

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
183
10:47 Jun-30-2011
Re: Utrasonic probe assessment
In Reply to Khairul at 10:34 Jun-28-2011 .

Dear colleagues,
there must be a misunderstanding:

Ultrasonic probes are covered by EN 12668-2 (not by part 1 which is for ultrasonic isntruments only).

Periodical checks are only required for instruments (part 1), not for probes (part 2).

Best regards

Udo Schlengermann

 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window