where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Technical Discussions
NDT Inspector,
Delta Corporation, India, Joined Jul 2019, 4


NDT Inspector,
Delta Corporation,
Joined Jul 2019
20:29 Jul-16-2019

For the UT Scan of Forging materials i am Using TR Probe.But My TR probe hasn't Face protection so it will damage probe .So I am planing to stick one Perspex on TR probe.can I stick one perspex or I have to cut the perspex sheet as one sheet in Transmit side & one is in Receiver side.I mean do we need a divider or separation between tips T & R or can we stick one single Sheet of Perspex on the tip ?

Edward Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1261

Edward Ginzel

R & D, -
Materials Research Institute,
Joined Nov 1998
21:53 Jul-16-2019
In Reply to Linto at 20:29 Jul-16-2019 (Opening).

You will need the divider to ensure the near surface resolution provided by the TR probe.


Product Spotlight


In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window