where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Ultrasonic Sciences Ltd
We specialize in the design and manufacture of automated and semi-automated ultrasonic testing systems, including multi axis, multi channels systems and phased array electronics.
129 views
Job Seeks
Azhar Iqbal
Other,
TUV Middle East (TUV Nord), United Arab Emirates (UAE), Joined Apr 2006, 35

Azhar Iqbal

Other,
TUV Middle East (TUV Nord),
United Arab Emirates (UAE),
Joined Apr 2006
35
12:28 Jul-17-2019
FFS / RLA

Job Location: UAE

Graduate Engineer preferably Mechanical.
At least 08-10 years of experience in process plants and good understanding process equipment like pressure vessel, piping, tank etc. and failure /corrosion mechanism.
Good knowledge in different type of conventional & advanced NDT techniques and shall have ASNT/PCN NDT qualification in RT, MT, PT & UT etc. Understanding of API-579 and capability / experience of conducting FFS level-1 & 2. Certification in API-510, 570 & 653 will be an added advantage. Good Experience in FFS, RLA and RBI based on international codes, standards and recommended practice.Very good knowledge and experience in inspection techniques, methods, procedures for inspection of equipment of relevant discipline

    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

CIVA 2017 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window