where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

144 views
Career Discussions
Seenikumaran
NDT Inspector,
India, Joined Aug 2019, 1

Seenikumaran

NDT Inspector,
India,
Joined Aug 2019
1
21:00 Aug-07-2019
PCN AND ISO

Dear experts,


What is the difference between BS EN ISO9712:2012 and EN 473?

Can we use ISO9712 LEVEL II Wherever pcn was asked by recruiter?

    
 
 Reply 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 177

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
177
10:14 Aug-08-2019
Re: PCN AND ISO
In Reply to Seenikumaran at 21:00 Aug-07-2019 (Opening).

Seenikumaran,
to answer your questions:
- In 2010 the process was started to replace EN 473:2008 by a revised version of ISO 9712:2005 as a combined EN ISO standard.
This the actual version now (EN ISO 9712 is identical to ISO 9712):
ISO 9712:2012, Non-destructive testing - Qualification and certification of NDT personnel.
By this date the European Standard EN 473 has been withdrawn.

- ISO 9712 is an International Standard only, whereas PCN is a certification scheme run by the BINDT.
More national certification schemes are based on ISO 9712.

With best regards

    
 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window