where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.
917 views
Job Offers
Kelly Dalke
Kelly Dalke
21:58 Aug-08-2019
Pipeline Integrity NDE Technician - UT2 | MT2

Job Location: Alberta, Canada
offered by Tilt Inspection & Consulting Inc.

Tilt Inspection is a specialist Pipeline Integrity NDE company operating out of Sherwood Park, Alberta since 2010. We are currently looking for experienced Pipeline Integrity NDE technicians with CGSB MT 2 and UT 2 certification to join our team of top professionals.

Training is provided for Pipeline Integrity and the use of Advanced Tools/Tech.

Wages are competitive and can be above union rates.

Hire immediately for training - commence work in Sept.

Position Overview:

Senior field technician that performs pipeline integrity inspections, corrosion assessments, general NDE, ILI correlation, data collection, defect mitigation and communication with pipeline operator engineers.

Work Site Locations: Various locations in Alberta, BC and Saskatchewan.

Primary Duties:

- Inspect, identify, interpret and evaluate pipeline defects in accordance with applicable codes,
standards, client specifications and procedures.
- Following procedures, protocols and defect reporting requirements.
- Select, calibrate and operate equipment used in the non-destructive examination (NDE) of pipelines
and/or other materials.
- Documentation of pipeline defects.
- Prepare pipeline integrity reports.
- Correlation of ILI Tool data with field-collected data.
- Perform pipeline integrity calculations.
- Assess soil and coating conditions.
- Perform inspections using advanced tools.
- Supervise or direct the work of trainees or staff.
- Understanding all rules and regulations practiced in the course of delivering services - as defined by
company policy and by client and/or site-specific guidelines.

If you fit this description, please send your Resume/CV.

    
 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window