where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
797 views
Technical Discussions
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
01:49 Sep-29-2004
Seamless pipe test.

Hi, Friendes

I want to test the seamless pipe by ultrasonic contact type method.

To cover the maximum area

# I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?

# Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?

Please Help to sort out my purpose. Thanking you.

S.G.




 
 Reply 
 
Ed T.
Ed T.
03:07 Sep-29-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: Hi, Friendes
: I want to test the seamless pipe by ultrasonic contact type method.
: To cover the maximum area
: # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: Please Help to sort out my purpose. Thanking you.
: S.G.
------------ End Original Message ------------

Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
What exactly are you trying to detect?



 
 Reply 
 
S.G.
Consultant
Enrico Enterprises, India, Joined Jul 2004, 20

S.G.

Consultant
Enrico Enterprises,
India,
Joined Jul 2004
20
05:46 Sep-30-2004
Re: Seamless pipe test.
----------- Start Original Message -----------
: : Hi, Friendes
: : I want to test the seamless pipe by ultrasonic contact type method.
: : To cover the maximum area
: : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get the more effective beam width ?
: : Please Help to sort out my purpose. Thanking you.
: : S.G.
: Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: What exactly are you trying to detect?
------------ End Original Message ------------

The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.




 
 Reply 
 
Neil Burleigh
Sales
Krautkramer Australia Pty Ltd, Australia, Joined Dec 2002, 158

Neil Burleigh

Sales
Krautkramer Australia Pty Ltd,
Australia,
Joined Dec 2002
158
07:16 Oct-05-2004
Re: Seamless pipe test.
Hello Shashu,
The formula for the determination of beam width Y = arc sin1.22(wavelength/diameter)
Which means that as the diameter of the crystal increases the beam width at a certain beam path length will decrease.
Are you trying to detect the N5 notch radially as well as longitudinally?
The diameter of the pipe will affect the beam spread and beam angle when testing longitudinally.
Will you be shaping the probe shoe to the contour of the pipe?

Regards

Neil Burleigh


----------- Start Original Message -----------
: : : Hi, Friendes
: : : I want to test the seamless pipe by ultrasonic contact type method.
: : : To cover the maximum area
: : : # I am using the angle probe 45 degree and 4 MHz and crystal size is 8x 9 mm and the beam spread is approx. 5 degree. As per my knoledge the effective beam width of this probe is Less Is it right ?
: : : # Can i use the 10 mm dia lonitudinal beam probe with the angulated wadge ( angle is 45 degree ) ? In this case can i get themore effective beam width ?
: : : Please Help to sort out my purpose. Thanking you.
: : : S.G.
: : Can you be more specific? What exactly are you testing the seamless pipe for? Is there a girth weld involved?
: : What exactly are you trying to detect?
: The defect is N5 notch and wall thickness is 5 mm to 15 mm. There is no weld nothing.
------------ End Original Message ------------




 
 Reply 
 
akin nowahalla
akin nowahalla
08:25 May-19-2005
Re: use of Seamless pipe
please possible to tell me what is used to produce seamless pipe/steel and what do we use this pipes/steels for.

thanks/me.


 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window