where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
783 views
Job Offers
Akash Kumar
Akash Kumar
09:51 Aug-15-2019
MULTI PCN NDT INSPECTORS

Job Location: MIDDLE EAST
offered by Oilngas Jobs

Dear Job seekers,

We are having a Long Term Job Offer in Middle East for MULTI PCN NDT INSPECTORS.

Please read the below requirements & terms carefully before apply & applications will be considered with matching profiles only :

Mandatory Requirements :

Academic Qualification - Minimum Degree ( Or ) Diploma
NDT Quantification - PCN Multi Disciplined in UT,MT,PT Methods with Validity
NDT Work Experience - Minimum 05 to 10 years field experience in Oil & Gas
Mandatory - Should have good knowledge & should familiar on performing NDE Inspection (UT,MT,PT)


OFFER TERMS:

Trade Test - Will be conduced by employer after relocation
Salary - Best will be provided depends on experience
Vacation - Yearly one month paid vacation
Accommodation & Transportation - Provided
Interview Mode - By Telephonic
Mobilization - Immediate
Status - Urgent
Note - Will be hired by visit visa & will get transferred to employment visa once relocated

Please Note :

Applicants should be available in India due to urgent requirement

Applications should be strictly mentioned in subject by :-
Name + Location + PCN (Methods ) + Years of Experience

Only Shortlisted candidates will be contacted for further process

Interested candidates ,Please send your updated CV with PCN,Educational,Experience Certificates to :

oilngasjobs@yahoo.com

    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window