where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
172 views
Technical Discussions
Grzegorz
NDT Inspector,
Poland, Joined Feb 2012, 15

Grzegorz

NDT Inspector,
Poland,
Joined Feb 2012
15
11:52 Aug-21-2019
ASTM 2175 Requirements of penetrant inspection

Hi,
Did someone work with this standard in refer to PT.
I need information about what is subject of evaluation discontinuities or indications??
Thank in advance.

 
 Reply 
 
SUMURAY
SUMURAY
18:45 Aug-21-2019
Re: ASTM 2175 Requirements of penetrant inspection
In Reply to Grzegorz at 11:52 Aug-21-2019 (Opening).

Excuse me SIR.
are you sure of this standard is correct?
I Think is ASTM E1417 or ASTM E165.

 
 Reply 
 
Grzegorz
NDT Inspector,
Poland, Joined Feb 2012, 15

Grzegorz

NDT Inspector,
Poland,
Joined Feb 2012
15
08:00 Aug-22-2019
Re: ASTM 2175 Requirements of penetrant inspection
In Reply to SUMURAY at 18:45 Aug-21-2019 .

Sie,
You're right, these mentioned by you standards refer to PT, but both contain only parameters for carring out of test.
ASTM 2175 contains only requirements of all NDT tests among others PT.

 
 Reply 
 

Product Spotlight

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window