where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
179 views
Technical Discussions
Grzegorz
NDT Inspector,
Poland, Joined Feb 2012, 15

Grzegorz

NDT Inspector,
Poland,
Joined Feb 2012
15
11:52 Aug-21-2019
ASTM 2175 Requirements of penetrant inspection

Hi,
Did someone work with this standard in refer to PT.
I need information about what is subject of evaluation discontinuities or indications??
Thank in advance.

 
 Reply 
 
SUMURAY
SUMURAY
18:45 Aug-21-2019
Re: ASTM 2175 Requirements of penetrant inspection
In Reply to Grzegorz at 11:52 Aug-21-2019 (Opening).

Excuse me SIR.
are you sure of this standard is correct?
I Think is ASTM E1417 or ASTM E165.

 
 Reply 
 
Grzegorz
NDT Inspector,
Poland, Joined Feb 2012, 15

Grzegorz

NDT Inspector,
Poland,
Joined Feb 2012
15
08:00 Aug-22-2019
Re: ASTM 2175 Requirements of penetrant inspection
In Reply to SUMURAY at 18:45 Aug-21-2019 .

Sie,
You're right, these mentioned by you standards refer to PT, but both contain only parameters for carring out of test.
ASTM 2175 contains only requirements of all NDT tests among others PT.

 
 Reply 
 

Product Spotlight

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window