where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
276 views
Technical Discussions
Steve K
USA, Joined Aug 2017, 5

Steve K

USA,
Joined Aug 2017
5
21:02 Aug-21-2019
Flux Flow Coils

I have a customer that's looking into a magnetic wet bench that can conduct multi-directional magnetizations. Instead of using traditional coils he talked about using something called 'flux flow coils'. I've never heard of this before. Can anyone give me more information about this?

 
 Reply 
 
George Hopman
Consultant,
NDE Solutions, USA, Joined Apr 2009, 44

George Hopman

Consultant,
NDE Solutions,
USA,
Joined Apr 2009
44
18:31 Aug-26-2019
Re: Flux Flow Coils
In Reply to Steve K at 21:02 Aug-21-2019 (Opening).

Magwerks out of Indianapolis has the best unit out there. I suggest contacting them.

 
 Reply 
 
Rick Lopez
R & D,
John Deere - Moline Technology Innovation Center, USA, Joined Jul 2011, 191

Rick Lopez

R & D,
John Deere - Moline Technology Innovation Center,
USA,
Joined Jul 2011
191
17:11 Aug-27-2019
Re: Flux Flow Coils
In Reply to Steve K at 21:02 Aug-21-2019 (Opening).

Steve,
I first saw this term used in two of Donald Hagemaier's 1991 Materials Evaluation articles where he promoted the use of these, and predicted a future move away from the traditional magnetizing coil when performing multi-directional and 3-D magnetization. Your question indicates how this forecast has fared thus far.

The idea behind them seems relatively simple, as they are coils wrapped around copper-covered laminated steel cores situated at the headstock and tailstock on a wet bench. The claim was that a more consistent longitudinal magnetization was possible across fairly long distances as opposed to more limited distances with a traditional coil. At least a few current vendors offer them as an option, but opinions on maximum length of usefulness seems to vary considerably (range seems to be from 20" up to 48"). I believe there has also been some exploratory work on the effect of having the two flux flow coils working together and opposing each other.

 
 Reply 
 
John Brunk
Engineering, NDT Level III
Self employed, part-time, USA, Joined Oct 1999, 162

John Brunk

Engineering, NDT Level III
Self employed, part-time,
USA,
Joined Oct 1999
162
23:14 Aug-27-2019
Re: Flux Flow Coils
In Reply to Rick Lopez at 17:11 Aug-27-2019 .

I have had very good experience with flux flow machines for relatively small parts such as bolts from 0.25” diam, 1” length to 0.75” diam, 8” length. Part I’ve was limited by maximum distance between the contacts.

 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window