where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
612 views
Technical Discussions
bounatiro
Algeria, Joined Aug 2019, 3

bounatiro

Algeria,
Joined Aug 2019
3
19:22 Aug-22-2019
radiography piping fill with water

dear expert
Our, company is contacted to do radiography for the welding joint of thin joint of piping diameter from 2 to 20", but the problem is almost the piping is filled with water, I searched any standard for doing radiography but unfortunately I didn't find any way,
please share your experience

 
 Reply 
 
laurie
Australia, Joined Feb 2019, 37

laurie

Australia,
Joined Feb 2019
37
02:56 Aug-23-2019
Re: radiography piping fill with water
In Reply to bounatiro at 19:22 Aug-22-2019 (Opening).

There aren't any standards that I know of for this situation but you can radiograph the joint.
Work out the equivalent thickness of steel for your water path, and then work out your achievable sensitivity and see if it meets code requirements.
HVL for water with IR192 is something like 70mm.
So your 2" with water would be equivalent to about an extra 10 mm of steel and the 20" about an extra 100 mm of steel.
Sensitivity might be ok for the 2" but 20" is no chance.
You would need to do test exposures to confirm sensitivity and you'd probably need 8 exposures to narrow your diagnostic length to improve the sensitivity for that region.

 
 Reply 
 
Shane Feder
, Quality Co-ordinator (SubSea)
Thailand, Joined Dec 2014, 89

Shane Feder

, Quality Co-ordinator (SubSea)
Thailand,
Joined Dec 2014
89
15:02 Aug-27-2019
Re: radiography piping fill with water
In Reply to laurie at 02:56 Aug-23-2019 .

Laurie has given you good advise.
It is very, very hard to get a code compliant radiograph with the pipe filled with water.
If you can meet sensitivity and density requirements then you can interpret but you will need test shots on all diameters and thicknesses first.

 
 Reply 
 
Angel
Angel
19:44 Sep-01-2019
Re: radiography piping fill with water
In Reply to laurie at 02:56 Aug-23-2019 .

2" pipe diameter- equivalent 10mm?
I made pipe with and without water with 4mm thickness and diameter 30mm - the same set up - density and sensitivity were similar, sensitivity hard to note

 
 Reply 
 
bounatiro hatem
Algeria, Joined Aug 2019, 3

bounatiro hatem

Algeria,
Joined Aug 2019
3
20:08 Sep-02-2019
Re: radiography piping fill with water
In Reply to Angel at 19:44 Sep-01-2019 .

Dear Expert

Thanks for all answer, us you said, i agree with my client to do some sample according to the idea of laurie, when i will do it i will share with you my radiogramme


Many thanks

 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window