where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

348 views
Technical Discussions
Jignesh Dhimar
NDT Inspector,
LMATS, Australia, Joined Apr 2015, 4

Jignesh Dhimar

NDT Inspector,
LMATS,
Australia,
Joined Apr 2015
4
07:59 Aug-23-2019
Finding Debonding between composites

Hello All,

Could anyone help me out with below mentioned two different cases

Case I- Sandwich structure made of Carbon Steel (CS-5 mm) + Polyurethane (PU-10 mm) + Carbon Fibre (CF-10mm). is there any practical solution to find debonding(planner or volumetric) between Interface 1(CS-PU) and Interface 2 (PU-CF).
Access for UT from only one side (Carbon steel side)

Case II- Sandwich structure made of CF (15 mm)+ PU(15mm) + CF (10 mm).
Same finding as Case I.
Access from only one side.

 
 Reply 
 
Wiesław Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wiesław Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
10:37 Aug-23-2019
Re: Finding Debonding between composites
In Reply to Jignesh Dhimar at 07:59 Aug-23-2019 (Opening).

Immersion or contact testing should be possible in the first case, but it will be necessary to use transducer with quite short pulse and quite sophisticated signal analysis, since the difference between total reflection and transmission into plastic is not very strong and many internal reflexions in steel can be expected.
Second case is more difficult due to the fact, that CF and PU are not very different and CF is quite attenuating. It should work, but requires careful development of suitable procedures.

2
 
 Reply 
 
Anand
India, Joined Jul 2016, 1

Anand

India,
Joined Jul 2016
1
10:40 Aug-23-2019
Re: Finding Debonding between composites
In Reply to Jignesh Dhimar at 07:59 Aug-23-2019 (Opening).

Hi,
Myself Anand.

I think UT will work for composites.Based on my work experience I'm telling. But the combination of metal and composites, I am not sure.

Thanks.

1
 
 Reply 
 
Daniel Braun
Daniel Braun
12:49 Aug-23-2019
Re: Finding Debonding between composites
In Reply to Jignesh Dhimar at 07:59 Aug-23-2019 (Opening).

Generally it is possible, if you have the samples available - you may ship them to Sonotron NDT A-Lab for performing the trials and laying out the necessary setup (instrument, probe, settings) - if you're interesting simply e-mail and we'll proceed further. The service is FOC

 
 Reply 
 
Andres Romero
NDT Inspector,
Spain, Joined Jul 2019, 13

Andres Romero

NDT Inspector,
Spain,
Joined Jul 2019
13
04:26 Aug-24-2019
Re: Finding Debonding between composites
In Reply to Jignesh Dhimar at 07:59 Aug-23-2019 (Opening).

zoom image



Hello, sorry for my English is not good.
If possible, by immersion. With squirt machine.
Several frequencies are needed.
 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window