where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

KARL DEUTSCH
INSTRUMENTS AND SYSTEMS FOR NON-DESTRUCTIVE TESTING OF MATERIALS
609 views
Technical Discussions
bounatiro
Algeria, Joined Aug 2019, 3

bounatiro

Algeria,
Joined Aug 2019
3
19:22 Aug-22-2019
radiography piping fill with water

dear expert
Our, company is contacted to do radiography for the welding joint of thin joint of piping diameter from 2 to 20", but the problem is almost the piping is filled with water, I searched any standard for doing radiography but unfortunately I didn't find any way,
please share your experience

 
 Reply 
 
laurie
Australia, Joined Feb 2019, 36

laurie

Australia,
Joined Feb 2019
36
02:56 Aug-23-2019
Re: radiography piping fill with water
In Reply to bounatiro at 19:22 Aug-22-2019 (Opening).

There aren't any standards that I know of for this situation but you can radiograph the joint.
Work out the equivalent thickness of steel for your water path, and then work out your achievable sensitivity and see if it meets code requirements.
HVL for water with IR192 is something like 70mm.
So your 2" with water would be equivalent to about an extra 10 mm of steel and the 20" about an extra 100 mm of steel.
Sensitivity might be ok for the 2" but 20" is no chance.
You would need to do test exposures to confirm sensitivity and you'd probably need 8 exposures to narrow your diagnostic length to improve the sensitivity for that region.

 
 Reply 
 
Shane Feder
, Quality Co-ordinator (SubSea)
Thailand, Joined Dec 2014, 89

Shane Feder

, Quality Co-ordinator (SubSea)
Thailand,
Joined Dec 2014
89
15:02 Aug-27-2019
Re: radiography piping fill with water
In Reply to laurie at 02:56 Aug-23-2019 .

Laurie has given you good advise.
It is very, very hard to get a code compliant radiograph with the pipe filled with water.
If you can meet sensitivity and density requirements then you can interpret but you will need test shots on all diameters and thicknesses first.

 
 Reply 
 
Angel
Angel
19:44 Sep-01-2019
Re: radiography piping fill with water
In Reply to laurie at 02:56 Aug-23-2019 .

2" pipe diameter- equivalent 10mm?
I made pipe with and without water with 4mm thickness and diameter 30mm - the same set up - density and sensitivity were similar, sensitivity hard to note

 
 Reply 
 
bounatiro hatem
Algeria, Joined Aug 2019, 3

bounatiro hatem

Algeria,
Joined Aug 2019
3
20:08 Sep-02-2019
Re: radiography piping fill with water
In Reply to Angel at 19:44 Sep-01-2019 .

Dear Expert

Thanks for all answer, us you said, i agree with my client to do some sample according to the idea of laurie, when i will do it i will share with you my radiogramme


Many thanks

 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window