where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

327 views
Technical Discussions
Lirin Philip
,
VALDEL , India, Joined Sep 2019, 10

Lirin Philip

,
VALDEL ,
India,
Joined Sep 2019
10
07:13 Sep-05-2019
NDT Ultrasonic testing

What is the relation between diameter of probe and Gain dB level in UT Testing? I have got 5MHz probes of size .5" and .25". Testing on same material, .5" probe takes only 26dB at 80% back echo while .25" probe takes 46dB. what must be the reason?

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 832

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
832
23:43 Sep-07-2019
Re: NDT Ultrasonic testing
In Reply to Lirin Philip at 07:13 Sep-05-2019 (Opening).

Smaller the dia higher is the beam spread

1
 
 Reply 
 
Akshay Gaikwad
NDT Inspector,
EQUATE Petrochemical Company, Kuwait, Joined Mar 2017, 2

Akshay Gaikwad

NDT Inspector,
EQUATE Petrochemical Company,
Kuwait,
Joined Mar 2017
2
11:29 Sep-08-2019
Re: NDT Uultrasonic testing
In Reply to Lirin Philip at 07:13 Sep-05-2019 (Opening).

Hi Lirin,
As you know larger diameter(0.5") probe emits more energy than smaller dia(0.25") probe.
As per Beam spread calculation larger dia (0.5") probe have less beam spread than smaller dia (0.25"), hence there is less energy loss(Attenuation) in larger dia probe.
that's why you are getting 26dB for 0.5" dia probe & 46dB for 0.25" dia probe to make 80% FSH.

For More clarification with this topic go through Attenuation Chapter in ASNT Level II Study Guide.

Hope you will be cleared by this, otherwise revert me...

2
 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window