where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

376 views
Technical Discussions
Raheel
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:01 Sep-05-2019
urgent help required regarding Signal Acquisition problem in MS5800 ET equipment

Hello everyone!

We are using MS-5800 ET equipment for last 10 years but facing this problem for the first time. When we start data acquisition, it doesn't display the real signal rather a continuous straight line is appearing on strip chart. Moreover, there is no change on lissajous window. We have tried with different probes but the same issue sustains. Also, for RFT the same thing happen. One more thing, all the LEDs are working properly except VDC. Kindly guide what can be the reason/s and also suggest some solution. Waiting for your replies.
Thank you.

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
10:21 Sep-05-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel at 06:01 Sep-05-2019 (Opening).

Once reinstall the multiview software and try again. Otherwise check the continuity of the probe using multi meter. Straight lines are coming due to the discontinuity in probe connectors.

Thanks and regards

Clinton Raja
8122110125

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:28 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
06:55 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 06:28 Sep-06-2019 .

When you open the multiview software, is it showing green signal? Or it's showing yellow? If it's not showing, try to troubleshoot the boot manager.

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:13 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:20 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 06:55 Sep-06-2019 .

It is showing green light. I think it is ok with boot configuration.

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 834

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
834
23:37 Sep-07-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 07:20 Sep-06-2019 .

I think you have hardware issues with MS 5800

 
 Reply 
 

Product Spotlight

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window