where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

366 views
Technical Discussions
Raheel
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:01 Sep-05-2019
urgent help required regarding Signal Acquisition problem in MS5800 ET equipment

Hello everyone!

We are using MS-5800 ET equipment for last 10 years but facing this problem for the first time. When we start data acquisition, it doesn't display the real signal rather a continuous straight line is appearing on strip chart. Moreover, there is no change on lissajous window. We have tried with different probes but the same issue sustains. Also, for RFT the same thing happen. One more thing, all the LEDs are working properly except VDC. Kindly guide what can be the reason/s and also suggest some solution. Waiting for your replies.
Thank you.

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
10:21 Sep-05-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel at 06:01 Sep-05-2019 (Opening).

Once reinstall the multiview software and try again. Otherwise check the continuity of the probe using multi meter. Straight lines are coming due to the discontinuity in probe connectors.

Thanks and regards

Clinton Raja
8122110125

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:28 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
06:55 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 06:28 Sep-06-2019 .

When you open the multiview software, is it showing green signal? Or it's showing yellow? If it's not showing, try to troubleshoot the boot manager.

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:13 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:20 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 06:55 Sep-06-2019 .

It is showing green light. I think it is ok with boot configuration.

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 832

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
832
23:37 Sep-07-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 07:20 Sep-06-2019 .

I think you have hardware issues with MS 5800

 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window