where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
785 views
Technical Discussions
Jiri Brus
Jiri Brus
10:02 Jul-24-2009
bond tester - signal evaluation

We are working with ZETEC Bond Tester S21R in sondicator mode for honeycomb structure test. We are able to record 1inch D disbond, but indication from that decrease to 1/2 of origin using 12 dB. It is OK ? According to general formula 20log H1/H2 should be 6 dB. Do you have anybody explanation ? Thank you.

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 523

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
523
11:55 Jul-24-2009
Re: bond tester - signal evaluation
In Reply to Jiri Brus at 10:02 Jul-24-2009 (Opening).

The Gain steps on The Zetec MIZ-21 series are 1/2 dB, Not 1 dB so a gain change of 12 is 6dB

This is explained in the manual, (Section 4.5.8 Probe Gain, page 4-13 in the MIZ-21 Manual, I don't have the S21R version immediately to hand) but who reads them that closely...

I have to say it confused me at first, and on a bad day it still does...

Joe

 
 Reply 
 
joel nyaga
joel nyaga
10:41 Sep-07-2019
Re: bond tester - signal evaluation
In Reply to Joe Buckley at 11:55 Jul-24-2009 .

Who could be having a zetec bond tester S-21R version to send to me. am having problems trying to use x-y mode (flying dot disbond measurement) and delamination setups.

 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window