where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
324 views
Technical Discussions
Raheel
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:01 Sep-05-2019
urgent help required regarding Signal Acquisition problem in MS5800 ET equipment

Hello everyone!

We are using MS-5800 ET equipment for last 10 years but facing this problem for the first time. When we start data acquisition, it doesn't display the real signal rather a continuous straight line is appearing on strip chart. Moreover, there is no change on lissajous window. We have tried with different probes but the same issue sustains. Also, for RFT the same thing happen. One more thing, all the LEDs are working properly except VDC. Kindly guide what can be the reason/s and also suggest some solution. Waiting for your replies.
Thank you.

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
10:21 Sep-05-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel at 06:01 Sep-05-2019 (Opening).

Once reinstall the multiview software and try again. Otherwise check the continuity of the probe using multi meter. Straight lines are coming due to the discontinuity in probe connectors.

Thanks and regards

Clinton Raja
8122110125

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
06:28 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Clinton Raja
,
India, Joined Aug 2019, 2

Clinton Raja

,
India,
Joined Aug 2019
2
06:55 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 06:28 Sep-06-2019 .

When you open the multiview software, is it showing green signal? Or it's showing yellow? If it's not showing, try to troubleshoot the boot manager.

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:13 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 10:21 Sep-05-2019 .

Thank you Raja for replying.
I have already tried both of options suggested by you. Also, tried with different ET probes but the problem sustains. :(

 
 Reply 
 
Raheel Zia
NDT Inspector,
Pakistan, Joined Sep 2013, 14

Raheel Zia

NDT Inspector,
Pakistan,
Joined Sep 2013
14
07:20 Sep-06-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Clinton Raja at 06:55 Sep-06-2019 .

It is showing green light. I think it is ok with boot configuration.

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 786

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
786
23:37 Sep-07-2019
Re: urgent help required regarding Signal Acquisition problem in MS5800 ET equipment
In Reply to Raheel Zia at 07:20 Sep-06-2019 .

I think you have hardware issues with MS 5800

 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window