where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
594 views
Technical Discussions
sandeep
sandeep
05:48 Oct-14-2004
scans

hello all,
could someone plz tell me very briefly what is the difference between different types of scans viz, a scan, b scan , c scan, p scan etc....
thanx
mail me at tosandeep@email.com


 
 Reply 
 
Rolf D.
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf D.

Director,
NDT.net,
Germany,
Joined Nov 1998
608
06:59 Oct-14-2004
Re: scans
Please see the NDT Encyclopedia at: www.ndt.net/article/az/ndtmain.htm

select the index of the UT Chapter.

----------- Start Original Message -----------
: hello all,
: could someone plz tell me very briefly what is the difference between different types of scans viz, a scan, b scan , c scan, p scan etc....
: thanx
: mail me at tosandeep@email.com
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window