where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
319 views
Career Discussions
Ashish
India, Joined Aug 2016, 5

Ashish

India,
Joined Aug 2016
5
14:58 Sep-10-2019
NAS 410 Aviation Standard NDT work procedure

Looking for help to have NDT work procedure as per EN 4179 AND NAS-410.
If any one can give a guide will be good help.
advancendts@gmail.com i will be available on this email.

Ash

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 304

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
304
09:57 Sep-16-2019
Re: NAS 410 Aviation Standard NDT work procedure
In Reply to Ashish at 14:58 Sep-10-2019 (Opening).

Ash,
The general idea is that you write your own version to your own requirements.
These two documents are the same, line for line, so it is not necessary to have both documents.

The text in these two documents is very useful to copy, but be certain that you read carefully what you are saying (example in several places it says "When required by the written practice.....". here you should decide if it is a requirement or not, and if it is a requirement, say so, but if not, do not mention it)

If you do not use a certain level of operator (e.g. Level 1 Limited), then you do not have to include this level in your document (exception is Level 3. You must define L3 requirements)
The training and experience hours shown in the document are mandatory minimum amounts. You can decide to use more, but you may not decide to use less.

Another useful document is Nadcap checklist AC7114 section 5.

Hope that helps.

Godfrey

 
 Reply 
 
Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 80

Rafid O. Lopez

, NDT Level 3
Mexico,
Joined Jan 2010
80
18:34 Sep-17-2019
Re: NAS 410 Aviation Standard NDT work procedure
In Reply to Ashish at 14:58 Sep-10-2019 (Opening).

Ashis

My recomendation is, use an EN4179 Level 3 for this purpose; some times the company need pay to have this service, a procedure alone is the same as NAS410 Standard alone; what you need is the Level 3 signature.

The standard and the procedure shall be almost the same in content. Remember with EN4179 you will need a RESPONSIBLE LEVEL 3, designated by the employer.

If you have specific questions, the best practice is use an EN4179 Level 3.

 
 Reply 
 

Product Spotlight

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window