where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi
Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
856 views
Technical Discussions
X. Chen
X. Chen
02:23 Jun-17-2004
How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?


 
 Reply 
 
Paul A. Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul A. Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
02:53 Jun-21-2004
Re: How to design a piezocomposite transducer?
Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
A lierature search should also produce several articles on transducer design.
Paul
----------- Start Original Message -----------
: I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: 2.how to select the materials of the transducer?
: 3.how to determine the structure size of the transducer?
------------ End Original Message ------------




 
 Reply 
 
X. Chen
X. Chen
03:13 Jun-21-2004
Re: How to design a piezocomposite transducer?
Thank you very much for your kindly help. I will try.

----------- Start Original Message -----------
: Try to get a copy of ULTRASONIC TRANSDUCERS FOR NONDESTRUCTIVE TESTING by M. G. Silk. It was published in 1984 by Adam Hilger Ltd, Bristol. There may be later editions. This book is a comprehensive review of transducer design and operation and also covers piezocomposite materials.
: A lierature search should also produce several articles on transducer design.
: Paul
: : I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
: : 1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
: : 2.how to select the materials of the transducer?
: : 3.how to determine the structure size of the transducer?
------------ End Original Message ------------


 
 Reply 
 
arun kumar
arun kumar
04:17 Oct-18-2004
Re: How to design a piezocomposite transducer?

I want to design a 1-3 piezocomposite transducer with 10Mz central frequency and wide bandwidth. But I have not any experience on it. So need your help.
1.Where can I get some technical books which introduce the principle of making transducer and step by step teaching how to make a PZT transducer?
2.how to select the materials of the transducer?
3.how to determine the structure size of the transducer?




 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window