where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
121 views
Technical Discussions
Zico
Egypt, Joined Sep 2019, 1

Zico

Egypt,
Joined Sep 2019
1
21:08 Sep-22-2019
Weld inspection by ROV

Hi colleagues

we are looking to know what is the best way and device to inspect on weld on subsea structure by using small ROV?

we are knowing the ACFM, but it's very expensive and over for our scope.

so we searching on alternative solution, it will be highly appreciated if you advise me.

    
 
 Reply 
 
Johns Petrik
ATI Hong Kong, Hong Kong, China, Joined Sep 2019, 1

Johns Petrik

ATI Hong Kong,
Hong Kong, China,
Joined Sep 2019
1
12:26 Sep-23-2019
Re: Weld inspection by ROV
In Reply to Zico at 21:08 Sep-22-2019 (Opening).

Numerous attributes of a weld can be assessed during welding investigation - some identifying with weld size, and others identifying with the nearness of weld discontinuities. The size of a weld can be critical, as it regularly relates legitimately to the weld's quality and execution. For example, undersized welds may not withstand stresses applied during administration.

    
 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window