where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
569 views
Job Offers
Dinesh Puthumana
Megarme Qatar, Qatar, Joined Apr 2019, 10

Dinesh Puthumana

Megarme Qatar,
Qatar,
Joined Apr 2019
10
13:08 Sep-24-2019
API/Welding/coating/corrosion/CP Inspectors/engineers

Job Location: Qatar onshore
offered by Palfinger Marine Doha

We have several openings for our onshore project in Qatar as given below. Interersted please forward CVs to ropeaccess.cv2019@gmail.com.

Position1: Mechanical inspectors - API 510 certificate and/or API 570 certificate & CSWIP 3.2, and/or API 653, Diploma in Mechanical Engineering or Bachelor of Engineering in Mechanical Discipline from a reputed institute.
The candidate shall have minimum ten (10) years experience in the oil and gas related business for Diploma holders / five (5) years for Bachelor of Engineering.
Salary: depending on experience, best in the market

Position 2: Welding Inspectors - CSWIP 3.2.2 minimum requirement. Diploma in Mechanical Engineering or Bachelor of Engineering in Mechanical Discipline from a reputed institute.
The candidate shall have minimum ten (10) year’s experience in the oil and gas related business for Diploma holders / five (5) years for Bachelor of Engineering

Position 3:Coating/Painting/Insulation Inspectors - a) The candidate shall posses a minimum NACE Certified Coating Inspector Level 2, BGas CSWIP Level 2 or ICORR Level 2, for a period of at least three (3) years. Diploma in Mechanical / chemical /civil Engineering with 10 years experience or Graduate in chemical or Mechanical Engineering with 5 years Experience from Reputed institute

Position 4:Cathodic protection Engineers/Technicians:Shall be qualified to NACE CP Technician (CP2) level (or equivalent). Diploma in Mechanical / chemical / Electrical Engineering/ with 10 years experience or Graduate in chemical / Mechanical/ Electrical Engineering with 5 years Experience from Reputed institute. Shall possess Graduate Engineering in Electrical or Metallurgical or Mechanical Engineering as minimum for Engineer position.

Position 5:Corrosion Engineer - Candidate shall has any of the engineering degrees:
I. Bachelor’s degree in Material Science and Engineering
II. Bachelor’s degree in Metallurgical Engineering.
III. Bachelor’s/ degree in Chemical Engineering
The candidate shall have minimum ten (10) years documented CP experience.

Position 6: Corrosion technician: - Technical Diploma (Higher National Diploma or equivalent) in Chemistry, Materials Engineering or Metallurgy as minimum.
- Minimum three (3) to five (5) years experience in Corrosion monitoring in oil & gas fields, with knowledge and experience of corrosion probe rate measurements using handheld ER and LPR meters

Location: Qatar onshore
Duty time: 8-12 hours
Project duration: 5 years
Food and accommodation: Provided
Joining: within 2 months

 
 

Product Spotlight

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window