where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Job Offers
09:19 Sep-30-2019
Required PCN UT 3.1 3.2 3.7 3.8 3.9 / PCN / CSWIP MT INSPECTORS

Posted by Emirates industrial laboratary
Job Location: Dubai

We are in need of Ultrasonic testing PCN qualified level 2 inspectors 3.1 & 3.2 ( Structural)- 12 Nos.
PCN qualified inspectors Level II- 3.1 & 3.2, 3.7, 3.8,3.9 + PCN MT ( experience in Nodes) -14 Nos.
PCN / Cswip Level II in MT -20 Nos. Very urgent. send your detailed resume with Level II certificates and availablity.


Product Spotlight

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window