where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
442 views
Technical Discussions
Koichiro Kawashima
Consultant
Ultrasonic Materials Diagnosis Lab., Japan, Joined Oct 2004, 2

Koichiro Kawashima

Consultant
Ultrasonic Materials Diagnosis Lab.,
Japan,
Joined Oct 2004
2
02:21 Oct-27-2004
High power piezo transducer

I'm looking for focused ultrasonic trasducers which work under high power, say 1.2kV and burst cyles of 10 to 20.
Operating frequency is 5, 10, or 20 MHz.


I'm trying nonlinear ultarsonic imaging of defects of kissing bonds using RITEC SNAP-5000.

Could anyone supply to me durable transducers?



 
 Reply 
 
Ethan
Ethan
05:36 Oct-27-2004
Re: High power piezo transducer
----------- Start Original Message -----------
: I'm looking for focused ultrasonic trasducers which work under high power, say 1.2kV and burst cyles of 10 to 20.
: Operating frequency is 5, 10, or 20 MHz.
:
: I'm trying nonlinear ultarsonic imaging of defects of kissing bonds using RITEC SNAP-5000.
: Could anyone supply to me durable transducers?
------------ End Original Message ------------

WOW, that is a tall order. My expereince has been that such power levels would destroy such a transducer. If it is a conventional design (backing layer bonded to xtal bonded to wearface/matching layer) you will end up with localized heating at the bond lines from the excessive vibrations of the xtal and then you get disbonds and a destroyed transducer. I would speak with ONDA in California (the late Alan Selfridge's company). I would also suggest doing a patent search on the Bubble jet printer technology (I believe it was a xerox patent)as they originally used sound to excite the droplets. Also check out http://www.labcyte.com. It is a high power, high energy acoustic application


 
 Reply 
 

Product Spotlight

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window