where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

324 views
Technical Discussions
Andres Romero
Andres Romero
15:51 Oct-07-2019
Olympus MX2 + Cobra Scanner

Hello, how to perform TCG with cobra scanner?
Work with one leg, two legs or three legs.
What hole diameter for thickness less than 10 mm?
Thanks

 
 Reply 
 
Paul Holloway
Consultant,
Holloway NDT & Engineering Inc , Canada, Joined Apr 2010, 255

Paul Holloway

Consultant,
Holloway NDT & Engineering Inc ,
Canada,
Joined Apr 2010
255
19:04 Oct-07-2019
Re: Olympus MX2 + Cobra Scanner
In Reply to Andres Romero at 15:51 Oct-07-2019 (Opening).




Andres,

Your questions indicate you may not have much experience with phased array or ultrasound in general. Are you performing these inspections for your own interest or for a client? What does your procedure say? What code are you inspecting to?

I would recommend reading the wonderful Olympus manual "Advanced in Phased Array Ultrasonic Testing Applications", which you can get through the Olympus website, or your local distributor free of charge.
 
 Reply 
 
langtuteng2
Armenia, Joined Nov 2014, 199

langtuteng2

Armenia,
Joined Nov 2014
199
01:52 Oct-09-2019
Re: Olympus MX2 + Cobra Scanner
In Reply to Andres Romero at 15:51 Oct-07-2019 (Opening).

this question confused me a month ago. maybe we should treat the cobra as the normal angle beam probe and use the same calibration method just as the PAUT probe.

 
 Reply 
 

Product Spotlight

Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)

Download our white paper on Scatter Correction for Industrial Cone-Beam Computed Tomography (CBCT)
...
Using 3D VSHARP, a fast GPU-Based Linear Boltzmann Transport Equation Solver here: http://bit.ly/2Y0t78P
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window