where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Controle Mesure Systemes
Contrôle Mesure Systèmes designs, develops and manufactures nearly 30 years a complete NDT range of products in eddy current and ultrasonic testing methods.
435 views
Technical Discussions
Koichiro Kawashima
Consultant
Ultrasonic Materials Diagnosis Lab., Japan, Joined Oct 2004, 2

Koichiro Kawashima

Consultant
Ultrasonic Materials Diagnosis Lab.,
Japan,
Joined Oct 2004
2
02:21 Oct-27-2004
High power piezo transducer

I'm looking for focused ultrasonic trasducers which work under high power, say 1.2kV and burst cyles of 10 to 20.
Operating frequency is 5, 10, or 20 MHz.


I'm trying nonlinear ultarsonic imaging of defects of kissing bonds using RITEC SNAP-5000.

Could anyone supply to me durable transducers?



 
 Reply 
 
Ethan
Ethan
05:36 Oct-27-2004
Re: High power piezo transducer
----------- Start Original Message -----------
: I'm looking for focused ultrasonic trasducers which work under high power, say 1.2kV and burst cyles of 10 to 20.
: Operating frequency is 5, 10, or 20 MHz.
:
: I'm trying nonlinear ultarsonic imaging of defects of kissing bonds using RITEC SNAP-5000.
: Could anyone supply to me durable transducers?
------------ End Original Message ------------

WOW, that is a tall order. My expereince has been that such power levels would destroy such a transducer. If it is a conventional design (backing layer bonded to xtal bonded to wearface/matching layer) you will end up with localized heating at the bond lines from the excessive vibrations of the xtal and then you get disbonds and a destroyed transducer. I would speak with ONDA in California (the late Alan Selfridge's company). I would also suggest doing a patent search on the Bubble jet printer technology (I believe it was a xerox patent)as they originally used sound to excite the droplets. Also check out http://www.labcyte.com. It is a high power, high energy acoustic application


 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window