where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Job Seeks
P.J van der Walt
NDT Inspector,
African NDT Centre, South Africa, Joined Dec 2018, 1

P.J van der Walt

NDT Inspector,
African NDT Centre,
South Africa,
Joined Dec 2018
20:55 Oct-07-2019
MT, PT PCN & ASNT Level 2 Technician

Job Location: Worldwide


Please if anyone have work available.
NDT Technician / Supervisor
With ±12 years’ NDT experience on various sites in the Power, Energy, Oil, Gas and Mining industries (Construction, Maintenance and Fabrication).
➢ Experienced in a wide variety of NDT methods (MT,PT,WT,HT,PMI).
➢ ±5 Years’ experience as a NDT Supervisor.​
➢ Experienced in supervising a large number of personnel. ​
➢ Worked with a wide variety of codes and procedures. Such as AWS, ASME and EN ISO.
➢ Enthusiastically Productive.
➢ Ability to work under pressure.
➢ Ability to interpret drawings.
➢ Good knowledge of reading isometric drawings.
➢ Great written and Communication skills in English.
➢ Highly experienced with Microsoft Office (Word,Excel,Access,PowerPoint,Outlook).

Kind Regards
P.J van der Walt


Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
e Quantitative Short Range Scanning.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window