where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Job Offers
Mathew Alexander
Mathew Alexander
08:51 Oct-09-2019
ToFD/PAUT Specialists

Job Location: Saudi Arabia
offered by Petrochem

The candidate shall have excellent knowledge of
1. Preparing Procedures and scan plans as per the requirements of the project spec. and excellent knowledge of Acceptance criteria as per Code Case of piping and pressure vessel codes ASME Div. 1 & 2 (Aspect ratios a/l, a/t).
3. More than 8 years hands on experience in ToFD/PAUT scanning, using various software, interpreting and evaluating the test results.
4. Minimum Qualification shall be BE/BTech in mechanical or related engineering. MSc. in NDT may also will be considered.

This is a managerial position with excellent salary package and family status.
Only those who can completely take up the Advanced UT department (ToFD/PAUT and manual UT) shall apply with CV only. (Please do not send any other documents.) if you are not competent enough please do not respond this ad.)
Candidates with Aramco approval in ToFD/PAUT and manual UT will be preferred.


Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window