where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

325 views
Technical Discussions
Jhon Rengifo
Jhon Rengifo
08:03 Oct-28-2004
Looking for a transducer/wedge for surface waves in steel

Hello.

I am looking for a transducer/wedge to generate surface waves on a stainless steel rod of around 3 feet long and 1 inch diameter. I am more interested in high sensitivity than in a high resolution, anyway I was thinking in a 1 MHz center frequency transducer for this application. The reason for the high sensitivity is that I need to locate some flaws away from the wedge without moving it. The size of the arrangement cannot be larger than 0.5 inch height and 1.2 inches long.

Thank you very much in advance for the information that you can provide me. Of course if you have any comment regarding this issue please contact me in this forum or via email.

Best regards,

Jhon.


 
 Reply 
 
Jimmy
Jimmy
02:34 Oct-31-2004
Re: Looking for a transducer/wedge for surface waves in steel
----------- Start Original Message -----------
: Hello.
: I am looking for a transducer/wedge to generate surface waves on a stainless steel rod of around 3 feet long and 1 inch diameter. I am more interested in high sensitivity than in a high resolution, anyway I was thinking in a 1 MHz center frequency transducer for this application. The reason for the high sensitivity is that I need to locate some flaws away from the wedge without moving it. The size of the arrangement cannot be larger than 0.5 inch height and 1.2 inches long.
: Thank you very much in advance for the information that you can provide me. Of corse if you have any comment regarding this issue please contact me in this forum or via email.
: Best regards,
: Jhon.
------------ End Original Message ------------

We can supply you the wedged.
NACA NDT


 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window