where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

943 views
Technical Discussions
Derek
Derek
07:16 Nov-05-2004
Surface Probe Eddy Current Inspection of Tubing

Has anyone here ever used a surface eddy current probe to examine stainless steel tubing? Specifically small diamter tubing (<= 1/8"). If anyone has any insight or links to information related to this they could offer I would appreciate it. Please send an email to: ddlucero@lanl.gov.


 
 Reply 
 
dirk wagner
NDT Inspector
ec-works, Germany, Joined Dec 2004, 2

dirk wagner

NDT Inspector
ec-works,
Germany,
Joined Dec 2004
2
01:29 Dec-09-2004
Re: Surface Probe Eddy Current Inspection of Tubing
----------- Start Original Message -----------
: Has anyone here ever used a surface eddy current probe to examine stainless steel tubing? Specifically small diamter tubing (<= 1/8"). If anyone has any insight or links to information related to this they could offer I would appreciate it. Please send an email to: ddlucero@lanl.gov.
------------ End Original Message ------------

Hi,
i did testing of stainless steel in german nuclear power plants. We were searching (successfully) for inside defects with eddy-current probes from the boundary of the tube.
More relevant than the diameter is the wall-thickness.
I hope, I can help you


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
04:21 Dec-12-2004
Re: Surface Probe Eddy Current Inspection of Tubing
----------- Start Original Message -----------
: : Has anyone here ever used a surface eddy current probe to examine stainless steel tubing? Specifically small diamter tubing (<= 1/8"). If anyone has any insight or links to information related to this they could offer I would appreciate it. Please send an email to: ddlucero@lanl.gov.
: Hi,
: i did testing of stainless steel in german nuclear power plants. We were searching (successfully) for inside defects with eddy-current probes from the boundary of the tube.
: More relevant than the diameter is the wall-thickness.
: I hope, I can help you
------------ End Original Message ------------
Hi,

SS tubes (austenitic) are normally tested during manufacture using an encircling coil from OD and during in-service inspection using an ID Bobbin coil. I would like to know the type of defects that you are trying to detect with the surface probe.

Swamy


 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Echomac® PA Tube Weld Tester

The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
...
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window