where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology

2429 views
Career Discussions
Muru
Muru
04:36 Sep-08-2018
Iso 9712 vs pcn

Am planning to take PAUT LEVEL 2...But am confused in which standard should I need to take..some people are telling to go in ISO 9712..Some are in PCN...now a days which is having scope and which certification is most asked in gulf countries..? Pls help me friends

 
 Reply 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 307

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
307
07:41 Sep-10-2018
Re: Iso 9712 vs pcn
In Reply to Muru at 04:36 Sep-08-2018 (Opening).

Hi Muru,
ISO9712 is an international standard for NDT Personnel Certification.
It is administered through several organisations, one of which is the UK NDT Institute, and their scheme administered by them in UK and some other countries is called pcn and conforms to the requirements of ISO9712

Godfrey

 
 Reply 
 
Ricardo Andreucci
FATEC - Technological University of Sao Paulo, Brazil, Joined May 2018, 38

Ricardo Andreucci

FATEC - Technological University of Sao Paulo,
Brazil,
Joined May 2018
38
18:44 Sep-10-2018
Re: Iso 9712 vs pcn
In Reply to Muru at 04:36 Sep-08-2018 (Opening).

Dear Mr. Muru

I agree with comment of Mr. Godfrey that the ISO 9712 is a international standard, used and accepted by several countries to develop their own standards in order to qualify and certify of NDT personnel. So, each country has its own standard based in ISO 9712. If you want or need to certify in PAUT, you should look for the standard in your country that comply with ISO 9712 or to get this certification in other country near you. I don´t know if PCN standard is accepted as a international standard like ISO 9712.

 
 Reply 
 
Thanika
Thanika
15:14 Nov-11-2019
Re: Iso 9712 vs pcn
In Reply to Muru at 04:36 Sep-08-2018 (Opening).

I am also confused in this things am willing to do advance ndt methods but which certifying body is better for all countries not only gulf kindly suggest me wether its pcn or iso 9712

 
 Reply 
 
Joe Buckley
Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT, United Kingdom, Joined Oct 1999, 528

Joe Buckley

Consultant, ASNT L-III, Honorary Secretary of BINDT
Level X NDT, BINDT,
United Kingdom,
Joined Oct 1999
528
22:21 Nov-11-2019
Re: Iso 9712 vs pcn
In Reply to Thanika at 15:14 Nov-11-2019 .

It should be made clear that there is no such thing as "ISO 9712 certification" - ISO is not a certification body, what there are are a number of certification schemes such as PCN (UK), CSWIP,(UK - welding specific) AINDT (Australia), CGSB( Canada), COFREND (France), DgZfP( Germany), ISNT(India) etc. etc. which comply with ISO 9712. In principle all these schemes are, assuming they are issued by a reputable body, deemed to be equivalent. That does not necessarily mean of course that an employer will treat them all equally, any more than employers will treat any equivalent qualification from different schools equally. That is up to them.

These are all individual certifications, which you can take with you when you change jobs. As distinct from employer based certification schemes such as NAS-410D, EN4179 or SNT-TC-1A, where a new employer must re-certify you.

I wonder how many times we must answer this..

 
 Reply 
 
Edward Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1307

Edward Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1307
13:25 Nov-12-2019
Re: Iso 9712 vs pcn
In Reply to Joe Buckley at 22:21 Nov-11-2019 .

Joe,
Agreed! After answering this same question on the same forum for 2 decades or more you would think that people might start to use the search engine that Rolf has provided before repeating the same topic over and over gain.
(BTW...nice summary of the situation).

 
 Reply 
 

Product Spotlight

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window