where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Airstar Inc.
Application of the newest technologies, such as air-coupled ultrasound, digital instrumentation, signal processing, and transducer technology.
1054 views
Technical Discussions
Wolfgang Graaf
Wolfgang Graaf
00:59 Nov-07-2004
ToFD testing

I am the QA Manager of W.E.Smith Hudson, We are Australias leading manufacturer of Pressure vessels and heat transfer equipment.

We wish to upgrade our NDT facility to test weldments more accurately as well as to archive also some time savings.

We need some help in deciding what equipment to buy to preform ToFD testing of welds on vessels which have been internally overlayed with stainless steel.

We would be very interested in methods to examine not only butt welds but one sided weldments too ( ie. nozzle neck to shell welds).

On of the requisites is, that the supplier must be able to provide support in Australia.

We are also interested in the application of phased array testing the equipment.

Any assistance would be very much appreciated.

Wolfgang Graaf


 
 Reply 
 
Stefan Medenbach
NDT Inspector
Müller und Medenbach GmbH, Germany, Joined Mar 2000, 1

Stefan Medenbach

NDT Inspector
Müller und Medenbach GmbH,
Germany,
Joined Mar 2000
1
07:42 Nov-07-2004
Re: ToFD testing
----------- Start Original Message -----------
: I am the QA Manager of W.E.Smith Hudson, We are Australias leading manufacturer of Pressure vessels and heat transfer equipment.
: We wish to upgrade our NDT facility to test weldments more accurately as well as to archive also some time savings.
: We need some help in deciding what equipment to buy to preform ToFD testing of welds on vessels which have been internally overlayed with stainless steel.
: We would be very interested in methods to examine not only butt welds but one sided weldments too ( ie. nozzle neck to shell welds).
: On of the requisites is, that the supplier must be able to provide support in Australia.
: We are also interested in the application of phased array testing the equipment.
: Any assistance would be very much appreciated.
: Wolfgang Graaf
------------ End Original Message ------------

Dear Wolfgang,
You will find several UT-Systems, which are able to perform TOFD. We decided a few month ago to buy a P-Scan UT System. It is easy going and it has the TOFD possibilty. You will find distributors in australia, I think. Further Information about the system you will find at: www.force.dk
They offer a lot of fine scanners as well.
Best regards
Stefan



 
 Reply 
 
Simon Amallraja
Simon Amallraja
08:28 Nov-07-2004
Re: ToFD testing
----------- Start Original Message -----------
: I am the QA Manager of W.E.Smith Hudson, We are Australias leading manufacturer of Pressure vessels and heat transfer equipment.
: We wish to upgrade our NDT facility to test weldments more accurately as well as to archive also some time savings.
: We need some help in deciding what equipment to buy to preform ToFD testing of welds on vessels which have been internally overlayed with stainless steel.
: We would be very interested in methods to examine not only butt welds but one sided weldments too ( ie. nozzle neck to shell welds).
: On of the requisites is, that the supplier must be able to provide support in Australia.
: We are also interested in the application of phased array testing the equipment.
: Any assistance would be very much appreciated.
: Wolfgang Graaf
------------ End Original Message ------------

Dear Mr. Wolfgang,

We are the Technical Coordinators for Force Technology,Denmark for India. We will be able to support you for your reqt. We recommend P Scan system with various scanners to suit to your applications.

kindly send your complete reqt with all details, so that we can suggest you the suitable scanner to you.

Mahindra Intertrade Ltd,
Mahindra House, TSR Complex,
1-7-1, Parklane,
Secunderabad - 500 003.
India.

Ph: 0 91 40 2781 8928.
Fax: 0 91 40 2781 9604.
Mobile: 0 91 98663 43309

D.Simon Amallraja - Assistant Manager - NDT.


 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1285

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1285
00:25 Nov-08-2004
Re: ToFD testing
Wolfgang:
There are a variety of equipment suppliers that can provide you with options. RD Tech has a new unit that has phased array, TOFD and eddy current array capabilities in a single battery-operated portable unit.

But you should keep in mind the Codes you have to work with. Technology is now out-pacing the Codes in that we have managed solutions and improvements (speed and repeatability) but the Codes are often only worded for manual UT. TOFD, even though not so new, is often having difficulties finding acceptance in construction stages due to the Codes not incorporating its use. This situation is changing but just a caution to keep it in mind as not all Codes are there yet.

Your cladding conditions are also a consideration as to the techniques you would select. These may depend on the method of cladding overlay and if you want to find flaws in just the overlay or also in the welds?

Regards
Ed

----------- Start Original Message -----------
: I am the QA Manager of W.E.Smith Hudson, We are Australias leading manufacturer of Pressure vessels and heat transfer equipment.
: We wish to upgrade our NDT facility to test weldments more accurately as well as to archive also some time savings.
: We need some help in deciding what equipment to buy to preform ToFD testing of welds on vessels which have been internally overlayed with stainless steel.
: We would be very interested in methods to examine not only butt welds but one sided weldments too ( ie. nozzle neck to shell welds).
: On of the requisites is, that the supplier must be able to provide support in Australia.
: We are also interested in the application of phased array testing the equipment.
: Any assistance would be very much appreciated.
: Wolfgang Graaf
------------ End Original Message ------------




 
 Reply 
 
JOhn
JOhn
05:34 Nov-08-2004
Re: ToFD testing
----------- Start Original Message -----------
: : I am the QA Manager of W.E.Smith Hudson, We are Australias leading manufacturer of Pressure vessels and heat transfer equipment.
: : We wish to upgrade our NDT facility to test weldments more accurately as well as to archive also some time savings.
: : We need some help in deciding what equipment to buy to preform ToFD testing of welds on vessels which have been internally overlayed with stainless steel.
: : We would be very interested in methods to examine not only butt welds but one sided weldments too ( ie. nozzle neck to shell welds).
: : On of the requisites is, that the supplier must be able to provide support in Australia.
: : We are also interested in the application of phased array testing the equipment.
: : Any assistance would be very much appreciated.
: : Wolfgang Graaf
: Dear Mr. Wolfgang,
: We are the Technical Coordinators for Force Technology,Denmark for India. We will be able to support you for your reqt. We recommend P Scan system with various scanners to suit to your applications.
: kindly send your complete reqt with all details, so that we can suggest you the suitable scanner to you.
: Mahindra Intertrade Ltd,
: Mahindra House, TSR Complex,
: 1-7-1, Parklane,
: Secunderabad - 500 003.
: India.
: Ph: 0 91 40 2781 8928.
: Fax: 0 91 40 2781 9604.
: Mobile: 0 91 98663 43309
: D.Simon Amallraja - Assistant Manager - NDT.
------------ End Original Message ------------

I have to agree with Ed on this one. The RD Tech system can do what you are looking for.


 
 Reply 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window