where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Technical Discussions
03:24 Nov-27-2019
when should we count the 3s when we use AC yoke testing.

there are two kinds of opinions
1.the power is on and spraying the particle, the whole magnetizing time us 3s.
2.after spraying the magnetic particle hold the power for 3s.
what's your opinion? the ASTM E709 don't identify it.

Miguel Diaz
Miguel Diaz
17:27 Nov-27-2019
Re: when should we count the 3s when we use AC yoke testing.
In Reply to Jim at 03:24 Nov-27-2019 (Opening).

Hola Jim,

Disculpa por escribirte en español pero entiendo bien tu pregunta y la puedo responder mejor en mi idioma.
La condición de usar una técnica de magnetización permanente durante la aplicación de las partículas o de magnetización residual es una condición afectada por la permeabilidad magnetica del material.... esto no se puede preveer teóricamente y es por esta razón que debes usar en la práctica tun indicador de fuga magnética tipo pastel o Burma Castrol u otro tipo según la aplicación que esté realizando.

Si el indicador genera o no las indicaciones, es la demostración de que la pieza tiene la suficiente permeabilidad para generar la fuga y atraer las partículas a las discontinuidades.


Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window