where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GE Inspection Technologies
Inspection Technologies, a business of the Baker Hughes, a GE company (BHGE IT), is one of the world's leading suppliers of nondestructive testin ...
749 views
Job Offers
Juan Lonergan
Juan Lonergan
19:38 Dec-05-2019
NDT PT LEVEL II

Job Location: Oxnard CA
offered by Hot Section technologies Inc.

NDT Level II PT Inspector

Hot Section Technologies (HST) is accepting resumes for a qualified NDT Level II PT inspector in Oxnard, California. Must have a minimum of two years documented experience.

Hot Section Technologies is a rapidly growing FAA and EASA Part 145 certified repair station providing maintenance, repair and overhaul services for a wide range of parts from airframe manufacturers such as ATR, Bombardier and Embraer.

MINIMUM QUALIFICATIONS:

1. A minimum of 400 hours of experience in liquid penetrant inspection of metallic materials.
2. Previous experience properly documented from a previous employer.
3. Must acquire and maintain nondestructive testing certification by passing required certification written and practical examinations in accordance with NAS410.
4. Knowledge of all department equipment and operations.

SKILLS REQUIRED:

1. Conduct tests, interpret results, evaluate for acceptance and rejection, and document results.
2. Be thoroughly familiar with the scope and limitations of the method in which they are certified.
3. Be able to organize and document NDT results.
4. Be familiar with the codes, standards and other contractual documents that control the method as utilized by the employer.

SPECIFIC DUTIES AND RESPONSIBILITIES:

1. Maintain the FPI line in accordance with company procedures and work instructions.
2. Perform daily FPI system checks and documents the results.
3. Perform daily FPI inspection of parts.
4. Perform FPI of material per the appropriate work instructions and product manuals.
5. Maintain a daily FPI log of all parts processed.
6. Prepares solution and process parts through necessary solutions for FPI operation.
7. Cleans, applies penetrant solution, washes, develops, dries and other preparatory operations.
8. Complies with standard procedure for checks on equipment.
9. Maintains all required processing records in specified form and detail.
10. Performs processing setup, makes changes or addition of solutions under instructions of level III..
11. Complies with written or verbal instructions from Supervisor or designated representative.
12. Performs a variety of other tasks of equal or less complexity as assigned by Supervisor or Level III.
13. Support QA department with Incoming and preliminary inspection.
14. Detect and report improper operation and unusual conditions to proper supervision.
15. Maintain work area and equipment in a clean and orderly condition. Follow all safety rules.
16. Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, co-workers, and supervisors.
17. All candidates must pass a visual acuity exam, must pay close attention to detail, have good hand/eye coordination, possess strong safety orientation, demonstrate strong communication and interpersonal skills as well as possess a positive attitude and have a strong work ethic.
18. All candidates must pass a pre-employment drug test and random ongoing on-the-job drug and alcohol testing.

1
 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window