where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
274 views
Job Offers
Mohammed Faiz darzi
Mohammed Faiz darzi
16:19 Dec-10-2019
PCN 3.1, 3.2 & 3.8, 3.9

Job Location: UAE
offered by Spectra NDT Engineers

Certification EN ISO 9712 certification scheme qualified (preferably PCN or CSWIP) UT inspectors in 3.7,3.8 and 3.9 categories of weld configuration. It is good to have UT 3.1 & 3.2 and MT certification also.
 
Experience
Minimum 5 years of UT weld inspection experience in structural fabrication is mandatory.
 
Note: Inspectors having experience only in UT corrosion and thickness gauging will not be entertained.
 
Experience in structural welds, fabrication sites are required.
 
Desirable to have experience/ knowledge of EN ISO 17640 and EN ISO 11666 standards.
 
Duration
6 months extendable on client requirements.

Salary range 7500 to 9000 AED
 
Location
UAE

Regards,

Mohammed Faiz

9967021676

info@spectrandt.com

 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window