where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

639 views
Technical Discussions
misha
misha
09:43 Aug-10-2003
digital oscilloscope question

for a long time i'm looking for the digital oscilloscope wich works just as analog one. I mean NOT a image on screen, but algorithm.
For instance: digital oscilloscope is waiting for trigger and then downloading data into memory for prosceccing;
analog oscilloscope represetns input signal scan n, n+1 and so on.
time delay between scan n and n+1 is constant (for instant= t sec.) (of course if user is not canging syncronization). Stabilizaton of the picture on the screen accomplishs by changing value t.
quesiton is does enyone know about DIGITAL!!! oscilloscope with such feature like analog have.




 
 Reply 
 
Johny English
Johny English
06:29 Aug-11-2003
Re: digital oscilloscope question
Tektronix TDS 210 will do the job for you. 6o MHZ bandwidth, 1GS/s


----------- Start Original Message -----------
: for a long time i'm looking for the digital oscilloscope wich works just as analog one. I mean NOT a image on screen, but algorithm.
: For instance: digital oscilloscope is waiting for trigger and then downloading data into memory for prosceccing;
: analog oscilloscope represetns input signal scan n, n+1 and so on.
: time delay between scan n and n+1 is constant (for instant= t sec.) (of course if user is not canging syncronization). Stabilizaton of the picture on the screen accomplishs by changing value t.
: quesiton is does enyone know about DIGITAL!!! oscilloscope with such feature like analog have.
------------ End Original Message ------------




 
 Reply 
 
Chandima
Chandima
05:00 Nov-17-2004
Re: digital oscilloscope question
I want some tutorials about following sections of digital oscilloscope.
1.] major operational principles of the instrument.
[2.] measurement techniques associated with the equipment.
[3.] special techniques that can be used to improve the accuracy of the measurement.
[4.] special considerations associated with attachments such as probes.
[5.]instrumentation problems and associated measurement errors.
[6.] applications associated with the instrument.


 
 Reply 
 
Rich Markley
Rohde & Schwarz, USA, Joined Dec 2018, 1

Rich Markley

Rohde & Schwarz,
USA,
Joined Dec 2018
1
00:33 Dec-12-2018
Re: digital oscilloscope question
In Reply to misha at 09:43 Aug-10-2003 (Opening).

Hi Misha, I think what you're looking for is a digital oscilloscope with a fast waveform update rate. Since you first posted this question, digital scopes have gotten much faster in this regard. Even lower-priced scopes, such as the Rohde&Schwarz RTC1000, have waveform update rates of more than 10,000 waveforms per second. When coupled with the other advantages of a digital oscilloscope, such as the ability to perform FFTs, capture signals to memory, and make a variety of automatic measurements, you'll find that these new digital oscilloscopes will do a very good job for you.

 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window