where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Eddyfi Technologies provide the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivit ...
Job Offers
Singapore, Joined Dec 2019, 1


Joined Dec 2019
06:12 Dec-24-2019
Advanced NDT Inspector

Job Location: Singapore and worldwide
offered by Cutech Process Services Pte Ltd

Job Location: Singapore and worldwide
Offered by Cutech Process Services Pte Ltd, Singapore
We are looking for Well experienced personnel for the following position.
Interested personnel can send your CV to hiringcps@cutechgroup.com & adminphl@cutechgroup.com

Position: Advanced NDT Inspector

Job description / Skill Requirement:
Perform Advanced NDT Such as PAUT,TOFD,ECT,RFET,IRIS,MFL Tank Floor Mapping on Various types of jobs @ Various Site locations
Liaise with the clients ,Getting work scope details and Job Request
Prepare technique sheets with Scan Plan Using ES Beam tool,
Collect Data at Site and able to do interpretation using Tomoview / OMNIPC and Multi-view software.
Prepare reports as per various client and procedure requirements.
Prepare ANDT Procedures and Written instructions.
Prepare Method statement and Perform risk assessment.
Update & Maintain All work-related documents with register.
Designing and involving Calibration Blocks and Validations Blocks fabrication.

Qualification and Experience Requirements:

Degree in Mechanical Engineering or Bachelor of Science or Equivalent
Must have NDT Level II cert by BINDT -PCN /TWI -CSIWP in PAUT / TOFD or ASNT Level 3 in UT,MT,PT & RT.
Minimum 2 years' experience in PAUT ,TOFD Tube Inspections ,MFL Tank Floor Mapping
Knowledge about other Advanced NDT Methods is an added advantage.
Shall Have good knowledge in ASME Section V & VIII codes.
Able to operate PAUT Machine (Olympus MX / MX2 ).
Able to operate Tube inspection Machine (Olympus MS 5800 & Eddify Octane II).
Able to Assess and Troubleshoot PAUT & TOFD equipment's and scanners.
Able to Assess and Troubleshoot MS 5800 Equipment ,IRIS kit.

Able to work at height,confined Space,offshore platforms Sites in different industry


Product Spotlight

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window