where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

TecScan Systems
We offer a complete line of NDT scanners, Immersion Tanks & Gantry systems which incorporate Ultrasonic, Phased Array & Eddy Current technologies.
239 views
Technical Discussions
Joss
Consultant,
Argentina, Joined Oct 2017, 3

Joss

Consultant,
Argentina,
Joined Oct 2017
3
14:24 Jan-14-2020
PERMANENT MAGNET MAXIMUM LIFTING FORCE

I did not find it.
It is not specified in ASME V - Art. 7 ??

Any input will be appreciated.


 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 786

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
786
19:12 Jan-14-2020
Re: PERMANENT MAGNET MAXIMUM LIFTING FORCE
In Reply to Joss at 14:24 Jan-14-2020 (Opening).

40 lbs

 
 Reply 
 
Anmol Birring
Consultant,
Birring NDE Center, Inc., USA, Joined Aug 2011, 786

Anmol Birring

Consultant,
Birring NDE Center, Inc.,
USA,
Joined Aug 2011
786
19:15 Jan-14-2020
Re: PERMANENT MAGNET MAXIMUM LIFTING FORCE
In Reply to Joss at 14:24 Jan-14-2020 (Opening).

T-762 ASME V, art 7

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 250

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
250
21:47 Jan-14-2020
Re: PERMANENT MAGNET MAXIMUM LIFTING FORCE
In Reply to Joss at 14:24 Jan-14-2020 (Opening).

Article 7 of ASME Sect V par. T-762 (c)specifies lifting power at least 40 pounds at maximum pole spacing and contact similar to what will be used during examination.

No maximum is specified.

I can imagine that a super strong permanent magnet may cause some problems.

 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window