where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology
151 views
Technical Discussions
George
George
17:51 Jan-15-2020
Open Shop radiography

Hi, we are looking at a future job that will not fit within our x-ray chamber. The likely hood is that we will need to do "Open Shop" radiography. We have all the necessary safety procedures in place but we are not sure if we need to notify the HSE prior to commencement. IRR17 states that when performing "Site Radiography" the contractor must be informed 7 days before commencement, but we're not sure whether or not "Open Shot" radiography within a controlled area (our workshop) comes into the same category.

 
 Reply 
 
G.R
NDT Inspector,
United Kingdom, Joined Jan 2020, 3

G.R

NDT Inspector,
United Kingdom,
Joined Jan 2020
3
19:56 Jan-15-2020
Re: Open Shop radiography
In Reply to George at 17:51 Jan-15-2020 (Opening).

https://www.hse.gov.uk/radiation/ionising/indradiography.htm

We carry out site radiography sometimes in our own company’s weld shop if it won’t fit in the rad compound, but we always make sure we get 7 days notice in writing from our boss, that way everyone’s covered if there are any questions asked.

 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

AMIGO2

TSC Amigo2 - ACFM technology has developed a solid reputation for accurately detecting and sizing
...
surface-breaking cracks through paint and coatings. As the industry demands increased performance in speed, signal quality, and portability, it’s time for an evolution. It’s time for Amigo2.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window