where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
153 views
Technical Discussions
George
George
17:51 Jan-15-2020
Open Shop radiography

Hi, we are looking at a future job that will not fit within our x-ray chamber. The likely hood is that we will need to do "Open Shop" radiography. We have all the necessary safety procedures in place but we are not sure if we need to notify the HSE prior to commencement. IRR17 states that when performing "Site Radiography" the contractor must be informed 7 days before commencement, but we're not sure whether or not "Open Shot" radiography within a controlled area (our workshop) comes into the same category.

 
 Reply 
 
G.R
NDT Inspector,
United Kingdom, Joined Jan 2020, 3

G.R

NDT Inspector,
United Kingdom,
Joined Jan 2020
3
19:56 Jan-15-2020
Re: Open Shop radiography
In Reply to George at 17:51 Jan-15-2020 (Opening).

https://www.hse.gov.uk/radiation/ionising/indradiography.htm

We carry out site radiography sometimes in our own company’s weld shop if it won’t fit in the rad compound, but we always make sure we get 7 days notice in writing from our boss, that way everyone’s covered if there are any questions asked.

 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window