where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
228 views
Technical Discussions
mark
mark
18:17 Jan-17-2020
Omniscan batteries

Ive been quoted £400 for a single Omniscan battery from Olympus.

Ive seen plenty of Li204sx batteries advertised online for circa 150USD put are all these compatible with an Omniscan or have Olympus modified there ones.

Any suggestions of where to get a more reasonably priced battery in Europe is greatly appreciated.


 
 Reply 
 
Matthias Dreifeld
NDT Inspector, CEO
Dreifeld Materialprüftechnik, Germany, Joined Sep 2005, 101

Matthias Dreifeld

NDT Inspector, CEO
Dreifeld Materialprüftechnik,
Germany,
Joined Sep 2005
101
11:48 Jan-20-2020
Re: Omniscan batteries
In Reply to mark at 18:17 Jan-17-2020 (Opening).

Hi Mark,
you can buy there directly from the manufacturer (https://www.accutronics.co.uk/).
For an MX2 you need:
NI2040OL29, 10.8V 8.7Ah (94.0Wh), Lithium Ion Smart Battery, each costs EUR 267.59.

 
 Reply 
 
laurie
Australia, Joined Feb 2019, 36

laurie

Australia,
Joined Feb 2019
36
21:14 Jan-20-2020
Re: Omniscan batteries
In Reply to mark at 18:17 Jan-17-2020 (Opening).

If its the same size and voltage it will work fine.
From Inspired Energy you're getting a smart battery with specific capacity, discharge and cutout but a dumb battery or different models of the same battery with or without a fuel cell will work fine.

 
 Reply 
 

Product Spotlight

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window