where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Career Discussions
08:29 Jan-27-2020
Clarification required

Dear Sir

I have certification in NAS 410 for previous company .Now I got an opportunity in another company.Can I certify with the same NAS 410 certificate in new company?
and also please let me know the price of the NAS 410 document

Rafid O. Lopez
, NDT Level 3
Mexico, Joined Jan 2010, 82

Rafid O. Lopez

, NDT Level 3
Joined Jan 2010
23:54 Jan-27-2020
Re: Clarification required
In Reply to smruti at 08:29 Jan-27-2020 (Opening).


You need understand the diference between Qualification and Certification (approval), you can use your experience documents from your previous employer (company) and perhaps your training diploma; now, with your new employer (company) you need to carry out new examinations in accordance with new documents (procedures, technique sheets, acceptance criterial, etc.).

If you pass the new examinations so, your new employer can issue a new certificate for you.

You need to put attention because maybe with your previuos employer you was using, for example: FPI method A (water-washable) and, with your new employer, you need use, FPI Method D (post-emulsifier); in this case the technique is new for you; so, you need take a new training, accumulate new experience and perform new examinations.

Remember, all of this need be approved by the Responsible Level 3, not for you, neither by quality manager.



Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window